creat by art - low forward voltage drop - low power loss, high efficiency - guardring for overvoltage protection - high surge current capability - halogen-free according to iec 61249-2-21 definition molding compound, ul flammability classification rating 94v-0 base p/n with suffix "g" on packing code - halogen-free base p/n with prefix "h" on packing code - aec-q101 qualified terminal: matte tin plated leads, solderable per jesd22-b102 meet jesd 201 class 1a whisker test, with prefix "h" on packing code meet jesd 201 class 2 whisker test v rrm 20 30 40 50 60 90 100 150 v v rms 14 21 28 35 42 63 70 105 v v dc 20 30 40 50 60 90 100 150 v i f(av) a cj pf r ja o c/w t j o c t stg o c document number: ds_d1308042 version: h13 note 2: measured at 1.0 mhz and applied v r =4.0 volts operating junction temperature range - 55 to +125 - 55 to +150 storage temperature range - 55 to +150 note 1: pulse test with pw=300 s, 1% duty cycle -2 typical thermal resistance 50 typical junction capacitance (note 2) 110 80 28 v maximum reverse current @ rated vr t j =25 t j =100 t j =125 i r 0.5 0.1 ma 10 5 - - peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load i fsm 25 a maximum instantaneous forward voltage (note 1) @ 1 a v f 0.55 0.70 0.80 0.90 srt 115 unit maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current 1 maximum ratings and electrical characteristics (t a =25 unless otherwise noted) parameter symbol srt 12 srt 13 srt 14 srt 15 srt 16 srt 19 srt 110 mechanical data case: ts-1 ts-1 weight: 0.2g (approximately) srt12 thru srt115 taiwan semiconductor schottk y barrier rectifier features - compliant to rohs directive 2011/65/eu and in accordance to weee 2002/96/ec
creat by art part no. part no. srt16 srt16 srt16 (ta=25 unless otherwise noted) document number: ds_d1308042 version: h13 srt16ha0 h a0 aec-q101 qualified ratings and characteristics curves srt16 a0 a0 srt16 a0g a0 g green compound note 1: "xx" defines voltage from 20v (srt12) to 150v (srt115) example preferred p/n aec-q101 qualified packing code green compound code description ts-1 5,000 / 13" paper reel package packing b0 ts-1 1,000 / bulk packing srt1xx (note 1) prefix "h" a0 suffix "g" ts-1 3,000 / ammo box (52mm taping) a1 ts-1 3,000 / ammo box (26mm taping) r0 srt12 thru srt115 taiwan semiconductor ordering information aec-q101 qualified packing code green compound code 0.00 0.25 0.50 0.75 1.00 1.25 0 25 50 75 100 125 150 175 average forward current (a) lead temperature ( o c) fig.1- maximum forward current derating curve srt15 - srt115 srt12 - srt14 0 10 20 30 40 50 1 10 100 current (a) number of cycles at 60 hz fig. 2- maximum non-repetitive forward surge current 0.001 0.01 0.1 1 10 100 0 20 40 60 80 100 120 140 instantaneous reverse current. (ma) percent of rated peak reverse voltage.(%) fig. 4- typical reverse characteristics tj=25 tj=75 tj=125 srt19-srt115 0.1 1 10 100 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 instantaneous forward current (a) forward voltage (v) fig. 3- typical instantaneous forward characteristics srt12-srt14 srt15-srt16 srt19-SRT110 pulse width=300 s 1% duty cycle srt115
creat by art min max min max a 2.00 2.70 0.079 0.106 b 0.53 0.64 0.021 0.025 c 25.40 - 1.000 - d 3.00 3.30 0.118 0.130 e 25.40 - 1.000 - p/n = specific device code g = green compound yw = date code f = factory code document number: ds_d1308042 version: h13 marking diagram srt12 thru srt115 taiwan semiconductor package outline dimensions dim. unit (mm) unit (inch) 10 100 1000 0.1 1 10 100 junction capacitance (pf) reverse voltage (v) fig. 5- typical junction capacitance srt19-srt115 srt15-srt16 srt12-srt14 f=1.0mhz vslg=50mvp-p 0.1 1 10 100 0.01 0.1 1 10 100 transient thermal impedance ( /w) pilse duration, (sec) fig. 6- typical transient thermal characteristics
creat by art assumes no responsibility or liability for any errors inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied,to any intellectual property rights is granted by this document. except as provided in tsc's terms and conditions of sale for such products, tsc assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of tsc products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify tsc for any damages resulting from such improper use or sale. document number: ds_d1308042 version: h13 notice specifications of the products displayed herein are subject to change without notice. tsc or anyone on its behalf, srt12 thru srt115 taiwan semiconductor
|
